Smoothie Depot
Last inspected: Sep 15, 2025
90
Score
Smoothie Depot has been inspected six times since 2024. Smoothie Depot was last inspected on Sep 15, 2025. Diners can read the low risk label as a sign that recent inspections have gone well.
The picture has improved over the last few visits: recent inspections have averaged around five violations, down from roughly eight violations earlier in the record.
When inspectors have written things up, “hand-washing sink supplies” has been the most frequent reason, cited two times.
Among Houston restaurants, this is a fairly standard result. There isn't much in the file that would give a customer pause.
6
Inspections
0
Critical latest
0
Major latest
2
Minor latest
Inspection History
Sep 15, 2025
Routine
2 minor violations.
View 2 violations
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
90
Sep 12, 2025
Routine
8 minor violations.
View 8 violations
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Water under pressure. water under pressure and at required temperature not provided to all fixtures and equipment that use water. if hot water is used, it shall be at least 110°f (43°c) except as specified in sections 20-21.12(d)(02) and 20-21.19(b) of this code.
20-21.15(c)
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
20-21.19(c)
Construction. walls, including nonsupporting partitions / wall coverings / ceilings, of walk-in refrigerating units / food preparation areas / food storage areas / food display areas / equipment-washing areas / utensil-washing areas not light-colored / smooth / nonabsorbent / easily cleanable except for ceilings over areas used only for beverage preparation and/or service. concrete or pumice blocks used for interior wall construction in these locations shall be finished and sealed to provide an easily cleanable surface except in dry storage areas.
20-21.23(b)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Special ventilation. cooking equipment not provided with a ventilation hood / not installed in the manner required by all applicable laws. this subsection does not apply to microwave ovens / electric convection ovens of approved types / electric rice cookers / ovens of approved types.
20-21.25(b)(05)
67
Aug 14, 2025
Routine Inspection (001)
6 minor violations. 1 corrected on site.
View 6 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
20-21.19(c)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Construction. walls, including nonsupporting partitions / wall coverings / ceilings, of walk-in refrigerating units / food preparation areas / food storage areas / food display areas / equipment-washing areas / utensil-washing areas not light-colored / smooth / nonabsorbent / easily cleanable except for ceilings over areas used only for beverage preparation and/or service. concrete or pumice blocks used for interior wall construction in these locations shall be finished and sealed to provide an easily cleanable surface except in dry storage areas.
20-21.23(b)
General. heating / ventilation / air conditioning systems not designed / installed so that make-up air intake and exhaust vents do not cause contamination of food / food-contact surfaces / equipment / utensils.
(corrected on site)
20-21.25(a)
74
Jan 30, 2025
Routine Inspection (001)
7 minor violations.
View 7 violations
Temperature measuring device, food. no temperature measuring device provided to assure attainment / maintenance of proper internal / holding refrigerated temperature of time/temperature controlled for safety (tcs) food.
20-21.04(i)
Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.
20-21.12(g)
Hand-washing sink maintenance. hand-washing sink / soap dispenser / hand-drying device/ related fixtures not kept clean / not in good repair.
20-21.19(d)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Special ventilation. cooking equipment not provided with a ventilation hood / not installed in the manner required by all applicable laws. this subsection does not apply to microwave ovens / electric convection ovens of approved types / electric rice cookers / ovens of approved types.
20-21.25(b)(05)
Labeling of materials. working containers used for storing poisonous / toxic materials such as cleaners and sanitizers taken from bulk supplies not clearly / individually identified with the common name of the material.
20-21.27(b)
General. food establishment and all parts of the property used in connection with operations of the establishment not kept free of litter and items that are unnecessary to the operation or maintenance of the establishment, such as equipment that is nonfunctional or no longer in use.
20-21.28(a)(01)
70
Aug 15, 2024
Routine
4 minor violations.
View 4 violations
Applicability of article; compliance; penalty for violation; variances, etc. permit holder / person in charge of the food establishment / mobile food unit not in compliance in accordance with provisions of article ii concerning food storage / food preparation / food display / training of employees in basic food safety principles including allergy awareness / not ensuring that food and conditional employees are informed of their responsibility to report information regarding health and activities as they relate to diseases that are transmissible through food / not ensuring written procedures and plans are developed by the food establishment are maintained / implemented.
20-19(d)
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
82
Jul 24, 2024
Routine Inspection (001)
13 minor violations. 2 corrected on site.
View 13 violations
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii.
20-19(b)
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Cross contamination. except as specified in subitem c of this item, food not protected from cross contamination by separating raw animal foods during storage, preparation, holding and display from: raw ready to eat foods including other raw animal food such as fish for sushi or molluscan shellfish or other raw ready to eat food such as vegetables; cooked ready to eat foods. frozen, commercially processed and packaged raw animal food may be stored or displayed with or above frozen, commercially processed and packaged, ready to eat food.
(corrected on site)
20-21.02(b)(01)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Temperature measuring device, food. food temperature measuring devices accurate to ±02°f in the intended range of use not provided / not used to assure attainment and maintenance of proper internal cooking, holding, or refrigeration temperatures of all time/temperature controlled for safety (tcs) food if the thermometers are scaled only in fahrenheit. if the thermometers are scaled in celsius or dually scaled, they shall be accurate to ±01°c in the intended range of use. a temperature measuring device with a suitable small-diameter probe that is designed to measure the temperature of thin masses not provided / not readily accessible to accurately measure the temperature in thin foods, such as meat patties and fish fillets.
20-21.04(i)
Materials; general. sponges. sponges used in contact with cleaned and sanitized or in-use food-contact surfaces.
(corrected on site)
20-21.10(a)(07)
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
Hand-washing sink faucets. hand-washing sink not equipped to provide water at a temperature of at least 100°f (38°c) through a mixing valve or combination faucet. hand-washing sinks in facilities providing custodial care for preschool age children that are used only by the children may provide only cold running water.
20-21.19(b)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
Food establishment construction / remodeling / alterations begun before submitting properly prepared plans / specifications for approval.
20-25(a)
52
Frequently Asked Questions
When was Smoothie Depot last inspected?
The most recent health inspection at Smoothie Depot on file is from Sep 15, 2025. The public record contains six inspections in total.
What is the most common violation at Smoothie Depot?
Across the inspection record, “hand-washing sink supplies” has been cited two times, more than any other issue at Smoothie Depot.
How does Smoothie Depot compare to other restaurants in Houston?
Smoothie Depot most recently scored 90 out of 100, which is about the same as the Houston average of 88.
Has Smoothie Depot's inspection record improved over time?
Yes. Recent inspections at Smoothie Depot have averaged around five violations per visit, down from roughly eight earlier in the record.
What does a low risk rating mean?
A low risk rating at Smoothie Depot means inspectors found minimal or no significant issues at the most recent visit. Most facilities at this tier have a clean recent inspection report.
Nearby Restaurants