Tavan School

Inspector notes: Observed the establishment offering plastic forks and spoons for self service with the opposite part of the handle being exposed. Knives, forks, and spoons that are not prewrapped shall be presented so that only the handles are touched by employees and by consumers if consumer self-service is provided. Employee flipped the utensils at the time of inspection

Inspector notes: Observed in-use commercial steamer without approved backflow prevention for which manufacturer's directions state a check valve is required at the water line. Provide an approved backflow device prior to re-inspection. For high-hazard connection where backpressure is possible, a Reduced Pressure Zone (RPZ) backflow assembly is required. RPZ must be installed at least 12 inches above the floor sink and hub drain line must be routed to nearest floor sink with a 1-inch air gap. Usage of copper or brass materials for water line downstream of RPZ is prohibited. All testable backflow devices must be certified