The French Corner Catering
Last inspected: Sep 5, 2025
78
Score
The French Corner Catering, located at 1300 Holman in Houston, TX, underwent a low-risk inspection on 2025-09-05. This inspection identified five minor violations, including issues with refrigerated storage thermometers, equipment maintenance, and the cleaning frequency of nonfood-contact surfaces. The catering facility has a history of mostly low-risk inspections across its four recorded evaluations.
4
Inspections
0
Critical latest
0
Major latest
5
Minor latest
Inspection History
Sep 5, 2025
Routine Inspection (001)
5 minor violations.
78
Jan 9, 2025
Routine
No violations found.
100
Nov 21, 2024
Routine Inspection (001)
5 minor violations.
78
Jul 25, 2024
Routine Inspection (001)
11 minor violations. 3 corrected on site.
58
Violations — Sep 5, 2025 Inspection
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Substantial (Critical)
Serious (Major)
General (Minor)
Nearby Restaurants