Sunny #7

8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.

Special requirements. manufactured food. all food manufactured, processed, or packaged in commercial food processing establishments or commissaries not labeled according to all applicable laws as defined in tfer 228.78 and 228.79.

General. bulk packaged food stored in food warehouse less than 6 inches from walls / stored on the floor / stored on unapproved racks / stored in a manner that does not permit cleaning of the storage area / stored in a manner that does not protect the foods from contamination by splash or other means.

Distressed merchandise, segregation and location. products that are held by the permit holder for credit / redemption / return to the distributor, such as damaged / spoiled / or recalled products shall be segregated and held in designated areas that are separated from foods / equipment / utensils / linens / single-service articles / and single-use articles. distressed foods, such as foods subjected to fire / flooding / excessive heat / smoke / radiation / other environmental contamination or prolonged storage shall not be directly donated for consumption by the consumer. distressed foods may be sold or donated to a licensed food salvage establishment if the establishment is permitted under the provisions of chapter 432 of the texas health and safety code. (corrected on site)

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned at least every 24 hours, for iced tea dispensers and consumer self-service utensils, such as tongs, scoops, or ladles. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.

Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.

Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.

Controlling pests, generally. premises not kept in such condition as to prevent the harborage or feeding of insects or rodents.

Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.