Sonic #12
Last inspected: Jul 21, 2025
64
Score
Sonic #12 has been inspected three times since 2023. The newest entry in the record is dated Jul 21, 2025. A medium risk score generally means inspectors found things to fix, though most weren't urgent.
There hasn't been much movement either way: counts have stayed near eight violations per visit across recent inspections.
When inspectors have written things up, “plumbing fixture installation” has been the most frequent reason, cited two times.
The city-wide average sits at 69, which Sonic #12's 64 doesn't quite reach. Taken together, the history looks like that of a busy facility working through the usual inspection cycle.
3
Inspections
0
Critical latest
0
Major latest
9
Minor latest
Inspection History
Jul 21, 2025
Reinspection (002)
9 minor violations. 3 corrected on site.
View 9 violations
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.
20-21.22(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.
20-21.25(b)(03)
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
(corrected on site)
20-20(c)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Removing dead or trapped birds / insects / rodents / other pests. dead or trapped birds / insects / rodents / other pests not removed from control devices and the premises at a frequency that prevents the accumulation or attraction of pests and minimizes exposure to decomposing remains.
(corrected on site)
20-21.21(d)
Controlling pests, generally. the presence of insects, rodents, and other pests shall be controlled to eliminate their presence within the physical facility and its contents and on the contiguous land or property under the control of the permit holder by routinely inspecting the premises for the evidence of pests.\r\n
(corrected on site)
20-21.21(a)(02)
64
Apr 1, 2025
Routine Inspection (001)
13 minor violations.
View 13 violations
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
20-21.19(c)
Hand-washing sink installation. hand-washing sink used for purpose other than hand-washing as specified in section 20-21.08(b) of this code.
20-21.19(a)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Removing dead or trapped birds / insects / rodents / other pests. dead or trapped birds / insects / rodents / other pests not removed from control devices and the premises at a frequency that prevents the accumulation or attraction of pests and minimizes exposure to decomposing remains.
20-21.21(d)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.
20-21.22(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.
20-21.25(b)(03)
52
Dec 26, 2023
Routine Inspection (001)
2 minor violations.
View 2 violations
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
90
Frequently Asked Questions
When was Sonic #12 last inspected?
The most recent health inspection at Sonic #12 on file is from Jul 21, 2025. The public record contains three inspections in total.
What is the most common violation at Sonic #12?
Across the inspection record, “plumbing fixture installation” has been cited two times, more than any other issue at Sonic #12.
How does Sonic #12 compare to other restaurants in Huffman?
Sonic #12 most recently scored 64 out of 100, which is lower than the Huffman average of 69.
Has Sonic #12's inspection record improved over time?
Results have been roughly steady. Inspections at Sonic #12 have averaged around eight violations per visit across the recent record.
What does a medium risk rating mean?
A medium risk rating at Sonic #12 means the most recent inspection turned up a handful of issues that the health department wrote up but did not classify as critical.
How often is Sonic #12 inspected?
Based on the inspection history on file, Sonic #12 is inspected around two times per year on average.
Nearby Restaurants