Morningside Thai Restaurant

Refrigerated storage. cold storage of foods. time/temperature controlled for safety (tcs) food not maintained at 41°f (5°c) in cold storage. (corrected on site)

Temperature measuring device, food. food temperature measuring devices accurate to ±02°f in the intended range of use not provided / not used to assure attainment and maintenance of proper internal cooking, holding, or refrigeration temperatures of all time/temperature controlled for safety (tcs) food if the thermometers are scaled only in fahrenheit. if the thermometers are scaled in celsius or dually scaled, they shall be accurate to ±01°c in the intended range of use. a temperature measuring device with a suitable small-diameter probe that is designed to measure the temperature of thin masses not provided / not readily accessible to accurately measure the temperature in thin foods, such as meat patties and fish fillets.

Dispensing utensils not stored in water at least 135°f (57°c) / water container is not cleaned as often as necessary. (corrected on site)

General. food employees not using the following cleaning procedures to clean their hands and exposed portions of their arms, including surrogate prosthetic devices for hands and arms. vigorous friction on the surfaces of the lathered fingers, finger tips, areas between the fingers, hands and arms (or by vigorous rubbing the surrogate prosthetic devices for hands and arms) for at least ten-15 seconds, followed by; thorough rinsing under clean, running warm water; followed immediately by thorough drying of cleaned hands and arms (or surrogate prosthetic devices) using a method specified in section 20-21.19(c) of this code. (corrected on site)

Design and fabrication; general. all equipment and utensils, including plasticware, not designed / not fabricated for durability under conditions of normal use / not resistant to denting, buckling, pitting, chipping, and crazing. cast iron may be used as a food-contact surface only if the surface is heated, such as in grills, griddle tops and skillets.

Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.

Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item. (corrected on site)

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

All dishwashing machines. dishwashing machine not thoroughly cleaned at least once a day or more often when necessary to maintain them in a satisfactory operating condition. (corrected on site)

Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.

Cleaning physical facilities. general. floor mats / duckboards / walls / ceilings / attached equipment and decorative materials not kept clean. only dustless methods of cleaning floors and walls shall be used, such as vacuum cleaning, wet cleaning, or the use of dust-arresting sweeping compounds with brooms.