Domino's Pizza #9422
Last inspected: Oct 6, 2025
61
Score
Domino's Pizza #9422, located at 1416 W Orem Dr in Houston, TX, had a moderate risk inspection on October 6, 2025. This inspection identified ten minor violations, including issues with mop storage, food handler certification, and public notification of inspection reports. Across four recorded inspections, the facility has generally maintained a low-risk profile.
4
Inspections
0
Critical latest
0
Major latest
10
Minor latest
Inspection History
Oct 6, 2025
Routine Inspection (001)
10 minor violations.
61
Nov 6, 2024
Routine Inspection (001)
2 minor violations.
90
Jun 16, 2024
Routine Inspection (001)
6 minor violations.
74
Jun 13, 2024
Routine Inspection (001)
No violations found.
100
Violations — Oct 6, 2025 Inspection
Cleaning equipment storage. after use, mops not placed in a position that allows them to air-dry without soiling walls / equipment / supplies.
20-21.28(e)
Food establishment failed to maintain on premises a certificate of completion of the food handler course for each food employee.
20-53(g)
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Chemicals. machines (single-tank, stationary-rack, door-type machines and spray-type glass washers) using chemicals for sanitization not provided with wash water greater than 120°f (49°c).
20-21.13(g)(01)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.
20-21.22(a)
Substantial (Critical)
Serious (Major)
General (Minor)
Nearby Restaurants