Denny's #7754
Last inspected: Feb 10, 2026
82
Score
Public records show five inspections at Denny's #7754 stretching back to 2023. On Feb 10, 2026, the health department conducted the most recent visit. A low risk tier reflects an inspection that turned up minimal issues.
There hasn't been much movement either way: counts have stayed near four violations per visit across recent inspections.
The most common issue across all inspections has been “plumbing fixture installation”, showing up four times.
Denny's #7754's latest score of 82 falls below the Houston average of 88. Taken together, the history is a positive one.
5
Inspections
0
Critical latest
0
Major latest
4
Minor latest
Inspection History
Feb 10, 2026
Routine Inspection (001)
4 minor violations.
View 4 violations
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
82
May 16, 2025
Routine Inspection (001)
4 minor violations.
View 4 violations
Reheating for hot holding. steam tables / bainmaries / warmers / similar hot food holding facilities may not be used for the rapid reheating of time/temperature controlled for safety (tcs) foods. prohibited hot food holding facility used for rapid reheating of time/temperature controlled for safety (tcs) food.
20-21.04(f)(02)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
82
Oct 14, 2024
Routine Inspection (001)
6 minor violations. 3 corrected on site.
View 6 violations
Reheating for hot holding. steam tables / bainmaries / warmers / similar hot food holding facilities may not be used for the rapid reheating of time/temperature controlled for safety (tcs) foods. prohibited hot food holding facility used for rapid reheating of time/temperature controlled for safety (tcs) food.
(corrected on site)
20-21.04(f)(02)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
(corrected on site)
20-21.11(a)(08)c[04]
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
(corrected on site)
20-21.11(a)(07)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers.
20-21.20(a)(03)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
74
Feb 8, 2024
Routine
No violations found.
100
Dec 29, 2023
Reinspection (002)
10 minor violations.
View 10 violations
Time/temperature controlled for safety (tcs) food. except when time is used as a public health control as specified in section 20-21.02(a)(02) of this code, time/temperature controlled for safety (tcs) food shall be kept at an internal temperature of 41°f (05°c) or below or at a temperature of 135°f (57°c) or above during display and service, except that roasts cooked to a temperature and for a time specified in table 20-21.04-3 of this code or reheated as specified in table 20-21.04-01 of this code may be held for service at a temperature of 130°f (54°c) or above
20-21.05(a)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Toilet fixtures. easily cleanable receptacles not provided for waste materials.
20-21.18(d)
Hand-washing sink maintenance. hand-washing sink / soap dispenser / hand-drying device/ related fixtures not kept clean / not in good repair.
20-21.19(d)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Signs clearly stating that smoking is prohibited within not conspicuously posted at every entrance to a public place.
21-244(b)
61
Frequently Asked Questions
When was Denny's #7754 last inspected?
The most recent health inspection at Denny's #7754 on file is from Feb 10, 2026. The public record contains five inspections in total.
What is the most common violation at Denny's #7754?
Across the inspection record, “plumbing fixture installation” has been cited four times, more than any other issue at Denny's #7754.
How does Denny's #7754 compare to other restaurants in Houston?
Denny's #7754 most recently scored 82 out of 100, which is lower than the Houston average of 88.
Has Denny's #7754's inspection record improved over time?
Results have been roughly steady. Inspections at Denny's #7754 have averaged around four violations per visit across the recent record.
What does a low risk rating mean?
A low risk rating at Denny's #7754 means inspectors found minimal or no significant issues at the most recent visit. Most facilities at this tier have a clean recent inspection report.
How often is Denny's #7754 inspected?
Based on the inspection history on file, Denny's #7754 is inspected around two times per year on average.
Nearby Restaurants